|
Mopar Rear Spoiler -
Classic Car & Auto Parts
|
 |
1970 A/B/E body "Go Wing"
Concours quality reproduction
spoiler kit includes the following: wing blade constructed of an
ABS based thermoplastic and is molded in gray (as original).
It's not fiberglass. |
No original Mopar wings were ever
made of fiberglass. This two-piece wing (as original)
derives its rigid stability from the material itself (as
original) instead of some secondary support such as a metal rod
or foam. And it's not light weight, it's the right weight...at
over 8 lbs.! All dimensions are correct, i.e., thickness, taper,
length, height, crown, and curve. A Mopar Authentic Restoration
Product; wing to pedestal attachment brackets; (2) pedestals
(hollow zinc die cast construction, powder coated black); pair
beveled gaskets; mounting stud set; underdeck reinforcement
brackets (powder coated gloss black); and FP202 adjustment
bolts. Absolutely every part needed, including placement
instructions, to correctly mount this spoiler on a 1970-1974
Barracuda/Challenger, 1970-1976 Duster/Dart/Demon or 1970
B-body. Made in USA.
***Rear spoilers are discount
exempt***
$389.00-complete
$359.00-without underdeck brackets
1970 A/B/E body "Go Wing" (Value
Priced)
Value priced reproduction spoiler kit includes the following:
wing blade constructed of high-density black polyethylene
plastic (originally constructed of fiber-reinforced plastic)
supplied in primer; wing to pedestal attachment brackets; (2)
pedestals constructed of ABS plastic with steel inserts
(originally constructed of zinc die cast metal); gaskets;
mounting studs. This is a quality, low priced reproduction wing
spoiler--with correct spacing between pedestals--that mimics the
overall look of the 1970 spoiler design but is not a concours
copy. Includes placement instructions. (Underdeck brackets not
included, available separately)
$175.00
***Rear spoilers are discount
exempt***
1971 Challenger/Cuda/Road Runner/Charger/Duster/Demon "Gull
Wing"
Concours quality reproduction spoiler kit includes the
following: wing blade (hollow, black ABS plastic construction as
original--NOT fiberglass. All dimensions are same as original,
i.e., thickness, taper, length, width, height, crown, and
curve), a Mopar Authentic Restoration Product; wing to pedestal
attachment brackets (improved cast aluminum construction); (2)
pedestals (hollow zinc die cast construction, powder coated
black); pair beveled gaskets; mounting stud set; underdeck
reinforcement brackets (powder coated gloss black); and
adjustment bolts. Absolutely every part needed, including
placement instructions, to correctly mount this spoiler on a
1970-1974 E or B Body and 1970-1976 A-body. Made in USA.
$399.00-complete
$369.00-without underdeck brackets
***Rear spoilers are discount
exempt***
1970 Challenger T/A or Cuda AAR "Duck Tail"
Concours quality black ABS plastic (as original, NOT Fiberglass)
reproduction duck tail style spoiler originally used only on the
1970 AAR 'Cuda model. Supplied in black primer finish--ready to
paint. Reproduction original style mounting brackets and
hardware included. Will fit all 1970-74 Barracuda or Challenger
models. Made in USA. A Mopar Authentic Restoration Product.
$325.00
***Rear spoilers are discount
exempt***
Rear Spoiler Underside Brackets
1970 Barracuda
To be used with the 70 style "Go Wing"
$40.00
1971 Barracuda
To be used with the 71 style "Gull Wing"
$35.00
1970-1971 Dodge Challenger
To be used with either the 70 or 71 style wing
$55.00
1971 B-body
To be used on all 1971 B-bodies to mount the 70 or 71 style wing
$40.00
1970 Dodge Coronet
Can be used with either 70 or 71 style wings
$65.00
1968-70 Dodge Charger
Can be used with either 70 or 71 style wing.
$65.00
1970 Plymouth Road Runner/GTX (ex. Superbird)
Can be used with either 70 or 71 style wings
$65.00
1970-76 Dodge Dart/Plymouth Scamp
Can be used with either 70 or 71 style wings
$65.00
1970-76 Dodge Demon/Dart Sport/Plymouth Duster
Can be used with either 70 or 71 style wings
$45.00
1970 Dodge Challenger T/A/Plymouth AAR Cuda
Original nuts, screws, clips, and mounting brakets with studs to
correctly mount an original spoiler or our reproduction.
$45.00
Spoiler Adjustment Bolts
Set of four special bolts, nuts, and lock washers that "clamp"
the studs of the pedestal mount spoiler to the under deck
mounting brackets
$25.00/set
Spoiler Mounting Studs
Set of four correct zinc dichromate plated studs to mount the
pedestals to the underdeck reinforcement brackets. Included are
4 hollow nuts to secure the studs to the underside of upper deck
lid panel to keep the studs from spinning during installation
(as original). Use with all wing spoilers.
$25.00/set
Spoiler Mounting Gaskets
Used between the pedestal and the deck lid top surface.
$15.00
Spoiler Legs
|
 |
Black powder coated hollow zinc die
cast (as original) reproduction of the spoiler pedestal
(stanchion) used with the 1970 and 1971 style wing
spoilers. Includes cross pin and Allen head bolt--correct for
1970 or Hex bolt -correct for 1971.
70 style-$55.00 each
71 style-$55.00 each |
Pedestal Attachment Bracket
|
 |
70 style-four stamped steel brackets
to attach the 1970 wing spoiler blade to the spoiler pedestals.
Includes correct style screws to properly fasten
these brackets to the wing blade.
$30.00/kit |
71 style-Aluminum brackets to attach the 1971 wing spoiler blade
to the spoiler pedestals. Whereas the original zinc die cast
material was too brittle for this application, our aluminum
brackets will not crack or break like the originals. Screws
included to attach brackets to the wing blade.
$65.00/kit
To order by phone or for product
availability, call (609) 332-4194.
Dante's proudly
offers Mopar automotive rear spoiler parts available for Dodge and
Plymouth vehicles of the following years: 1962, 1963, 1964,
1965, 1966, 1967. Other insulation available for years
include 1968, 1969, 1970, 1971, 1972, 1973 and 1974.
|
