|
Mopar Spark Plug Wire Bracket
Kits and Retainers -
Classic Car & Auto Parts
Spark Plug Bracket Kits
Brackets are correct gauge steel & thermo-plastic coated where
applicable.
Brackets may require minor bending or fitting to route wires
correctly.
All kits include the correct number
of brackets necessary for that particular application.
View diagram of proper bracket
mounting position
Diagram
 |
WR36 - 1966-67 Big Block Complete Bracket Kit - $70
"K"
bracket is also required if used on C-Body applications
and must be purchased separately. |
 |
WR36A - 1967 Big Block A-Body Complete Bracket
Kit - $90 |
|
 |
WR38- 1968 Big Block Complete Bracket
Kit - $75
"K"
bracket is also required if used on C-Body applications
and must be purchased separately. |
 |
WR38A - 1968 Big
Block A-Body Complete Bracket Kit - $90
|
 |
WR49 - 1969 Big Block Complete
Bracket Kit - $75
"K"
bracket is also required if used on C-Body applications
and must be purchased separately. |
 |
WR43 - 1970-1971 Big Block Complete
Bracket Kit - $70
"K"
bracket is also required if used on C-Body applications
and must be purchased separately. |
 |
WR69 - 1972-1978 Big Block Complete
Bracket Kit - $70
"K"
bracket is also required if used on C-Body applications
and must be purchased separately. |
 |
WR49A - 1969 Big
Block A-Body Complete Bracket Kit - $90 |
 |
K - (1)
Required - $10 each
Big
Block C-Body w/HP, Big Block A-Body, & Applications
where #7 Cylinder Ignition Wire runs over valve cover.
Bolts
to left rear exhaust manifold stud. |
Spark Plug Wire Insulators
#719-69/74 All Models with a Big
Block. Snaps onto the front corner exhaust manifold
brackets and the thermostat
housing.......................................$5.00 each
#AX005-Correct white nylon wire
retainers. Used on 273, Big Block and Hemi motors to insulate
the wires from valve covers or wire routing
brackets.......................$3.00/ea
#604-69/74 Small block spark wire
clip (snaps onto the tabs on the valve covers)white, holds 4
wires...........................................................................................$5.00/ea
#605-70/74 Small block spark wire
clip (snaps onto the tabs on the valve covers) white, holds 2
wires...........................................................................................$5.00/ea
#395-66/68 Small block spark plug
wire clip, white, holds 2 wires.................$5.00/ea
Spark Plug Shields
|
 |
PWS01 - (1) Required
- $16 Each
An exact
reproduction of a hard to find plug shield. Bolt to the
fourth Magnum exhaust manifold stud from the front to
protect #7 spark plug wire boot. For use on B and
E-Body cars only! |
 |
PWS02- (1) Required
- $16 Each
An exact
reproduction of a hard to find plug shield. This spark
plug shield bolts under the sixth and seventh head bolt
to protect #6 and #8 spark plug wire boots. Correct for
1970 and later Big Block applications. Also found on
later 1969 Big Block engines. |
 |
PWS03 - (1-2)
Required - $16 Each
An exact
reproduction of a hard to find plug shield. This spark
plug shield bolts under the sixth and seventh head bolt
to protect #6 and #8 spark plug wire boots. Correct for
1967-1969 Big Block applications. A second shield is
required on HP C-Body and Big Block A-Body Applications
to protect #5 and #7 spark plug wire boots. |
To order by phone or for product
availability, call (609) 332-4194.
Dante's proudly
offers Mopar automotive electrical componets available for Dodge and
Plymouth vehicles of the following years: 1962, 1963, 1964,
1965, 1966, 1967. Other insulation available for years
include 1968, 1969, 1970, 1971, 1972, 1973 and 1974.
|
